SERVEX Equipment Division

SERVEX

Originally a part of the Industrial Engineering Group and with a history dating back to the 1930's. Servex Steelweld was acquired by CEM in the early 1980's and today this long tradition of design and manufacturing continues with Australia's best selling Laser Wheel Aligner the LX7 series and a range of Hydraulic Workshop Presses.

Wheel Aligner

Wheel Aligner

LX7-3000 Laser Wheel Aligner

The dominant Wheel Aligner in the Australian Market with a low price but high performance. The LX7-3000 can perform all wheel alignment functions that the "High End Market" machines can do at a much lower cost.

Fast & Accurate – High volume workshops have found the LX7-3000 well suited to cope with heavy workloads.

Mains power is not required to perform an alignment because the lasers are powered by rechargeable batteries (charger supplied), which gives about 18-24 hours of continuous beams.

Self-centering wheel clamps fitted with specially designed adaptors for those expensive MAG wheels are attached to the vehicle with a quick pull of a lever, this eliminates any rim distortion, however the facility to do Run-Out Compensation is built into the aligner.

The LX7-3000 is a complete package, with Turntables, Slip Plates, Steering Clamp, Brake Depressor all standard, in addition to this a CD of Vehicle specifications is included with each machine, this program has the facility to print out a work sheet and to also save the customer's details to a data base, all this is done without the cost of additional computer hardware, it can be done on the office computer.

Set Back
  • Camber
  • Caster
  • SAI
  • Set Back
  • TOOT
  • Run Out Compensation

Truck Wheel Aligner

LX7-3000T

Servex have the flexibility to adapt the LX7-3000T Truck Aligner for the following applications.

Trailers
  • Prime Movers
  • Trucks
  • Buses
  • Trailers

Features:

Photos courtesy of True Track Truck Align Picton WA
  • Full Floating Heavy Duty Turntables with a capacity of 6500 kg per axle.
  • Wheel Range up to 22.5" Rims
  • Portability, mains power is not necessary to carry out an alignment
  • Laser accuracy, and a full charge will give about 24 hours of continuous laser use
  • Portable Read-Out for Camber, Caster and SAI
  • Chassis Checking Scale
  • King Pin Scale and Clamp
  • Calibration can be done in minutes on site, no outside technician required
  • Servex personnel commission equipment and conduct full training on site

Hydraulic Workshop Presses

Rolling Head

30 to 200 Tonnes "H" Frame

Options:

  • Fixed Head
  • Rolling Head
  • Manual Operation
  • Power Operation

A full stock of replacement parts is available for standard size presses. We also have the capability to build special presses based upon the clients requirements.

back to top